Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Antique Radio

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 07-24-2020, 11:53 AM
vortalexfan vortalexfan is offline
VideoKarma Member
 
Join Date: Sep 2018
Location: Northern Indiana
Posts: 1,992
Quote:
Originally Posted by Kevin Kuehn View Post
How about leave the defective 50k above chassis for originality, snip the wiring below and add a modern replacement under chassis? It's no more sacrilegious than changing caps. The filter choke, who knows, you'll find out if it's good once you trace the wiring or fire the set up under load. These things are so old that the copper wire used had impurities along with not so good insulating varnish which allows the wire to oxidize and corrode open over time. Same issues with the stage coupling transformers. The finer wire winding's are most subject to corroding open.
Ok, thanks! I might just do that. What wattage should I use for that plate resistor? They didn't specify a wattage in the service manual.

Also if the filter choke is bad, could I just replace that with a resistor?

Thanks.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:28 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.