Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Vintage TV & Radio Tech Forum

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 07-13-2020, 09:55 PM
maxhifi's Avatar
maxhifi maxhifi is offline
VideoKarma Member
 
Join Date: Dec 2010
Posts: 1,871
I think it means something is drawing increased current periodically. Increased current would load the power supply more, producing ripple. If you remove the horizontal output tube plate cap (and suspend it so it doesn't short circuit to anything), I'd bet you a glass of beer the ripple goes away.

If this is the case, try changing the horizontal oscillator tube again and substituting a different horizontal output tube if you have one. Also make sure the components in the horizontal section are all good, capacitors and resistors.

Last edited by maxhifi; 07-13-2020 at 09:58 PM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:58 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.