Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 06-21-2020, 11:15 PM
Penthode's Avatar
Penthode Penthode is offline
VideoKarma Member
 
Join Date: Jun 2009
Location: Kitchener/Waterloo Ontario Canada
Posts: 1,463
Quote:
Originally Posted by Tom9589 View Post
Any idea why RCA put that 5.1 ohm resistor in the filament circuit of the discriminator tube?
That is a good question. I thought about this from the different aspects of cathode temperature and space charge or possibly improving discriminator linearity.

I think the clue may be gathered from the Radio Designers Handbook by F. Langford-Smith Fourth Edition (1954) on page 1095 under FM Detectors. RCA was using the Foster-Seeley discriminator which according to Langford-Smith was subject to introducing troublesome heater-cathode hum with a miniature vacuum tube such as the 6AL5. The later Ratio Detector was not subject to the hum problem.

I believe that the introduction of the 5.1 ohms reduced the a.c. heater potential and lifted one leg of the filament from ground to help balance and reduce the hum potential between heater and cathode. Because the 6AL5 is a signal detector in this application, the reduced cathode temperature and resultant space charge reduction would not significantly affect its operation.

This is my opinion and I am open to other thoughts.

Last edited by Penthode; 06-21-2020 at 11:18 PM.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:25 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.