|
|
|
#4
06-10-2020, 10:07 PM
|
|||
|
|||
|
I'm not familair with the 'Stik' version of JB Weld. A 'quick setting' product has little time to wick into the microstructure of the joined surfaces, resulting in a poor bond. I've used original (slow setting) JB weld extensively over the years. I mix it about 55% hardener, 45% resin rather than the recommended 50/50 mix. It sets up harder that way.
This guy scientifically tests some other products' performance - https://www.youtube.com/watch?v=XObmZIbHOzY Last edited by old_coot88; 06-10-2020 at 10:24 PM. 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode