Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #18  
Old 06-10-2020, 03:53 PM
Jon1967us Jon1967us is offline
VideoKarma Member
 
Join Date: Nov 2018
Posts: 350
Quote:
Originally Posted by Notimetolooz View Post
I have a 465. I doubt very much the diodes are a problem. Five of the six are silicon and the sixth is germanium in the meter circuit. Much more likely is the switches and pots, even the cable is a possibility since it is flexed in use.
Hopefully the panel meter itself is OK.


I missed your post earlier, and you're right, all of the diodes I tested (couldn't find the 5th Silicon) were fine. It was a case of bad electrolytics, dirty pots, and an out of cal meter.

Now it reads fairly accurately.

I'm not sure if the Cutoff test works though. The meter didn't go anywhere on the test, adjusting the G2 knob. Not sure what's going on there...

The CRT on the GE tests fine - low end of 'GOOD' which I think is pretty decent for a 65 YO
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:43 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.