Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 05-04-2020, 11:36 AM
Yamamaya42's Avatar
Yamamaya42 Yamamaya42 is offline
VideoKarma Member
 
Join Date: Nov 2018
Location: Round Rock TX
Posts: 3,253
Quote:
Originally Posted by old_tv_nut View Post
Peaking coils are not sharply tuned, like an IF or tuner coil. The shunt (in other words, parallel) resistor is there to damp the resonance so that you do not get too much peaking / ringing etc. A lower shunt resistor usually just means you will get less peaking and a slightly less sharp picture. You cannot improve this by adding a series resistor.

When you get the coil, if it is physically possible to disconnect one end of the resistor from the coil without mechanically destroying it, you could do that and add a shunt resistor of the specified value.
Edit: I think I misread. If you mean adding 10k in series with the 12k (not in series with the whole assembly), that would work too.


Similarly, if a peaking coil calls for a shunt resistor but the replacement has none, you can just add a resistor in parallel.
the coil is lit wrapped around the resistor , i this case, and painted over with colored epoxy.
https://i.ebayimg.com/images/g/HSkAA...LGB/s-l300.jpg
this is not an exact pic, but it gets the idea across
__________________
=^-^=
Yasashii yoru ni hitori utau uta. Asu wa kimi to utaou. Yume no tsubasa ni notte.
いとおしい人のために
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:17 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.