Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 04-20-2020, 09:17 AM
Kevin Kuehn's Avatar
Kevin Kuehn Kevin Kuehn is offline
Workin' Late Again
 
Join Date: Jan 2011
Location: WI
Posts: 3,976
So after changing all those bypass caps is your B+ back where it should be in the tuner and video IF circuits?

I can't remember if you showed us your tuner? I'm wondering if it's the standard coil type, and if so have you tried adjusting the local oscillator adjustment for the individual channel you're set to? If it has those adjustments they can be off enough that the fine tuning won't get you best picture and sound.

That contrast mod should work. Likely you can even use a 500 ohm pot. However you'll still need to set the rf/if gain for best operation as there is no AGC in this set. But you'll at least have separate gain control over video.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:32 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.