![]() |
|
#7
|
|||
|
|||
|
ok back to this beast .. the votages after the 5u4 i get 295v when it should be 280v , 285v when it should be 270v , so its running a little high but not enough to knock things out of whack
vert out voltages are close its the vert mult that is off pin 6 should be 155v i get 92v , pin 7 should be -58v i get -37v i will check the anode voltage to se what i get and post that. Now the crt is a replacement , no number or make anywhere , is it possible the crt is not a proper replacement and the yoke needs to be changed ? Also even if thats the case the vertical issue needs to be taken care of , you cant make a letter box image if you wanted to and as stated the 155v is 92v and the -58v is -37v and that could be a reason. any suggestions ? Last edited by kramden66; 04-12-2020 at 01:26 AM. |
| Thread Tools | |
| Display Modes | |
|
|