Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #24  
Old 04-07-2020, 11:29 AM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 15,496
I use slip plate to replace failed aquadag. https://www.amazon.com/Slip-Plate-Pl.../dp/B005ESITFQ

One can will do several 20" CRTs. The process to recoat is fairly straightforward: remove neck hardware from CRT and remove CRT from set, place CRT face down on soft material to prevent screen scratches, scrape loose dag off with stiff brush, clean bell with glass cleaner and repeat brush down, mask off screen and ~2" perimeter around HV connection with blue masking tape and paper, also mask off 2" perimeter around neck on bell of CRT (can throw plastic bag over neck and tape that down), then coat the bell with slip plate the way you would if you were spray painting it, let dry and reinstall into TV.

The original dag had perimeter boundaries...if enough of it is intact for you to accurately discern those boundaries use the original boundaries as the masking edges instead of my crude mask here and 2" this and that advice above...the dag should all be connected to it's self there should not be any islands of dag.


Do not replace your CRT over dag flaking... suitable dag replacement material is being made, but new CRTs compatible with sets of that era are not made and will not be made again.
__________________
Tom C.

Zenith: The quality stays in EVEN after the name falls off!
What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:01 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.