Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 03-28-2020, 11:02 AM
Yamamaya42's Avatar
Yamamaya42 Yamamaya42 is offline
VideoKarma Member
 
Join Date: Nov 2018
Location: Round Rock TX
Posts: 3,248
flyback removed...

https://imgur.com/VQodl6R
https://imgur.com/qw1tylZ

There are cracks in the " doughnut" but not too bad, right now I think there is nothing to loose in covering the windings with corona dope.

at this point I tend NOT TO believe what the meter is telling me, as when I had this apart, I took the chance to check the 2 resistors under the HV rect base, the 3.3 ohm to the heater is OK, but the 1m going to the CRT anode lead checked wide open, VERY BAD, even with it like that, I was getting 5kv at the CRT.
So...
I have a new 6BG6G coming, gonna try and dope the FBT as best as I can, replace the 1m, put it all back and see what happens.
__________________
=^-^=
Yasashii yoru ni hitori utau uta. Asu wa kimi to utaou. Yume no tsubasa ni notte.
いとおしい人のために
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:10 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.