Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 03-27-2020, 06:54 PM
JohnCT's Avatar
JohnCT JohnCT is offline
VideoKarma Member
 
Join Date: Jan 2020
Posts: 749
Quote:
Originally Posted by Yamamaya42 View Post
ummm, is this a problem, i really hope not, cause if it is, I'm screwed.

https://imgur.com/x1izfje

between point 2 -3 I get 250 ohm on a DVM but from 1 - 2 it's 95.6 ohms.
is the FBT bad ? T_T

What I would do is see if there's an alternate schematic of the TV, like a SAMS or Riders to be sure it's not a mistake. Otherwise, it looks like you have some adjacent turns shorted.

A ringer would show that, as would something like a B&K analyst or Sencore VA48 etc. that would drive the flyback directly.

John

EDIT: that looks a lot like a 630, and that looks like RCA's drawing... If it's a clone, then RCA also has 180 ohms for that part of the winding.

Last edited by JohnCT; 03-27-2020 at 07:00 PM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:36 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.