Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #8  
Old 03-23-2020, 06:59 PM
vortalexfan vortalexfan is offline
VideoKarma Member
 
Join Date: Sep 2018
Location: Northern Indiana
Posts: 1,992
OK so I was looking in the Sam's Photofact for this TV and found that the specs given in the manual for the thermistor for this TV is 120 Ohms Cold, with that in mind what kind of thermistor should I get?

I know there are two different types of thermistors, ones start off high resistance when Cold then as they warm up they kick in at zero ohms and then there's ones that start off at zero ohms cold and as they warm up they get higher in resistance.

I'm assuming I'm going to need one that starts off high resistance cold and then goes to zero when its warm, if so would any of the thermistors in the Mouser link below work in this application?

https://www.mouser.com/Circuit-Prote...z0x6xbZ1z0z5h6

Thanks for your help!
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:10 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.