Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #14  
Old 02-26-2020, 09:15 PM
Crist Rigott Crist Rigott is offline
VideoKarma Member
 
Join Date: Oct 2015
Location: Waxahachie, TX
Posts: 1,519
Well, I've been looking at this set for some time and it's time to get on with the restoration.

Here are a few pics of what I'm starting with. It was the usual dirty and a trip to the car wash cleaned it up enough to get started with.

I tested all the tubes and they all tested in the green. Some were pretty low, so those will get replaced.

It looks pretty much unmolested. There was some work done on the chassis but it doesn't look like anything was butchered.

Tomorrow I'll pick up my order of resistors and E-Caps from Mouser and then we'll get serious.

I powered it up on the bench today. I got some audio and a small raster. Then I noticed a small whiff of smoke coming from the back of the chassis. I shut it down right away. Enough of that for sure. At least I know what I have now.

BTW, it looks like this was from run 11? and the serial number is 053219.















Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:54 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.