Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #14  
Old 02-15-2020, 07:08 PM
dtvmcdonald's Avatar
dtvmcdonald dtvmcdonald is offline
VideoKarma Member
 
Join Date: Nov 2012
Posts: 1,268
This assumes you never find a cross reference.

The first thing to do is see if you can find the connected end by removing the broken parts. If so, try measuring the remaining inductance (not connected across resistor).

If not, rewind the rest of the coil and count the turns. Then rewind with roughly the same size wire with an estimate of the number that got ruined.

Lacking anything else, try inductors in the range 70 to 390 uH across 39K,
and use whatever you think looks good. These things are noncritical
and are often tuned by eye by the designers. Ideally you look at the horizontal
sync pulse waveforms on a scope.

100 to 150 uH probably will work fine.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:54 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.