![]() |
|
#5
|
||||
|
||||
|
Possible.
Wiggle tubes, each one between the detector and point of signal loss should induce noise when wiggled. Have you cleaned the tuner contacts?...if they are dirty that can stop signal. If you have removed the chassis check a the wires are still connected to the tuner.... some sets don't have strain relief on that wiring and flexing it breaks it off its solder points...I have a Silvertone with that issue.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 |
| Audiokarma |
| Thread Tools | |
| Display Modes | |
|
|