Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 02-07-2020, 10:23 AM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 15,496
If it has a focus tube pull it out and replace with a 6KV diode (or 3 2KV in series). If you can find a SS HV rect that will help too. Removing filament winding load from a flyback usually cools them well....

Check your HV too if it is low pull the shunt rect cap and see if it gets normal or high if it does that then the regulator circuit has a problem and is overloading the HV winding... which will cause over heat.

My 29JC20 tends to run hot after mitigation of it's issues so I leave the top door open for ventilation cooling.
__________________
Tom C.

Zenith: The quality stays in EVEN after the name falls off!
What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4

Last edited by Electronic M; 02-07-2020 at 12:56 PM. Reason: autocorrect changed rect to text on me...
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:32 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.