Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #8  
Old 01-15-2020, 10:18 AM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 15,496
Quote:
Originally Posted by demy1942 View Post
Thanks Tom for the answer, I actually tried to wrap it around, what about if I built up some solder, let it dry, file down to a tight fit. Would that work the same way? I am new with any electronics work.
The thing about soldering in there is, if your iron tip is actually small enough to fit, that if the body of the jack is plastic you can melt it faster than you can get a solder bead in there... I'd just change the jack on the TVs PCB at that point...if you want something original look for a junk monophonic cassette recorder from the period with a mic input jack and use solder wick or a solder sucker to remove the jack from the tape recorder PCB, then install on the TV.

I checked my adapter last night and it is identical to the eBay part.
__________________
Tom C.

Zenith: The quality stays in EVEN after the name falls off!
What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:11 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.