Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #34  
Old 12-25-2019, 10:32 AM
dtvmcdonald's Avatar
dtvmcdonald dtvmcdonald is offline
VideoKarma Member
 
Join Date: Nov 2012
Posts: 1,268
I was working on my Pilot yesterday to see why it always showed hum in the picture
and the horizontal sync broke up if the contrast was too high. It has always done this.
It turned out to be my mistake .. a 6BA6 with a very mild case of heater-cathode leakage
was in the last IF amp socket and a good 6AU6 was in the video amp socket. That's
backwards. Moving the 6AU6 and a new 6BA6 almost fixed that. The remaining hum
is probably capacitave from the series heater string.

I also needed to tweek the audio IF trap so I looked under the chassis.
My set, which has good linearity, is using two .02 uF 6 kV ceramic caps in parallel
for each vertical deflection plate coupling.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:50 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.