Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 12-13-2019, 08:56 PM
DeLorean00 DeLorean00 is offline
VideoKarma Member
 
Join Date: Aug 2019
Posts: 57
Next, I started on the TV chassis. This TV has seen a lot of service work over the years. The CRT is a rebuild, the flyback is a replacement, and there are a few capacitors and electrolytics that were changed. Also, all the tubes were of different brands. So this TV saw a fair amount of use, but no one has been in here to work on it for around 50 years.



I replaced all the capacitors, electrolytics, power resistors, few resistors, and power cord.

I know some people like to restuff the old paper caps, so I did save all the stuff I took off the chassis in case I decide to go back and do that. Right now I am just trying to get it up and running.



The first power-up was a bit confusing. I did not get any high voltage and when I was checking my voltages on the board they were coming and going. It was happening so much I started to doubt my meter or probes. I ended up finding a broken wire coming right off the power transformer for the main B+. It was making contact but it was broken so it was just laying on top of the terminal. I fixed that and all my voltages went right to where they were supposed to be and I got a raster.



I cleaned the tuner and I hooked up a DTV box to it and was able to get a good picture. However in the high voltage cage I am getting some corona around the socket of the 1x2 if I blow on it. I have ordered some corona dope and am cleaning the connections and reflowing the solder.



So this brings me up to current progress as of today 12/13/19. I have been working on this for around a week and a half. I would have got more done but I keep having to wait on parts to arrive.

I am not sure if people are interested, but I can try and start uploading my restoration projects as this time of year I tend to do lots of them.

I hope everyone has a great weekend!
Chris.

Last edited by DeLorean00; 12-14-2019 at 07:57 PM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:12 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.