![]() |
|
|
|
#1
|
|||
|
|||
|
Quote:
|
|
#2
|
||||
|
||||
|
Not sure it doesnt Dj. 36MC6 used in later hybrids IIRC. There was a 14" & 19" all tube. IIRC the 14" used a plug in damper diode that went often & the 19" a tube. IIRC there was a differance in HV regs. also.. May explain the 24 or 31
filaments. One thing I know is ALL of them used those lousy 5GH8's. Always have a sleeve ready when working on one ! 73 Zeno ![]() LFOD ! |
|
#3
|
|||
|
|||
|
Quote:
The CTC51,53 used 450ma series tube and not as many 6GH8's. The IF strips and audio circuits are solid state.
|
|
#4
|
|||
|
|||
|
Hi Red Raster.ill check rcc 134 manual and get back to you. RonL
|
|
#5
|
||||
|
||||
|
CTC53 chassis schmatic can be found in Electronics-Technicican Dealer, September 1973 Issue, TekFax 1487:
https://americanradiohistory.com/Arc...an-1973-09.pdf ALL RCA Chassis from 1964 to 1988ish are listed in the TekFax, and are available either in the ET-D magazines or the published collections Tekfax 104-116 available at ARH as well: https://americanradiohistory.com/Rad...g_Magazine.htm <-left side
__________________
Brian USN RET 22YRS (Avionics/Cal) CET-Consumer Repair and Avionics ('88) "Capacitor Cosmetologist since '79" When fuses go to work, they quit! |
| Audiokarma |
![]() |
| Thread Tools | |
| Display Modes | |
|
|