Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #5  
Old 11-17-2019, 08:10 PM
dtvmcdonald's Avatar
dtvmcdonald dtvmcdonald is offline
VideoKarma Member
 
Join Date: Nov 2012
Posts: 1,268
These is no glue between the rubber and the glass. There may be between rubber and the mumetal.

In any case three applications of denatured alcohol with 15 minuites
between them freed the sticky rubber pieces up.

Getting the bezel properly straight took four tries.

The tube works fine. I have merely passable purity so far. The static
convergence was far out. With no magnets I've got it a bit better.
Maybe the magnets will do it. One of my magnets was originally bad.
I never found a replacement, so I'm using a steel threaded rod with
a piece of Alnico glued to the outer end.

Examination of the corpse was interesting. It does not have all-white getters.
What getters there are are nice and black except for a very faint 1/4 inch
white halo. But two of them have separated from the glass and are in pieces,
sort of frilly looking. Its possible a piece fell between two electrodes and caused the fatal arc.

Off to dinner and to relax my back.

http://www.videokarma.org/attachment...1&d=1574039391
Attached Images
File Type: jpg _MG_9226bad15BP22.jpg (117.4 KB, 96 views)

Last edited by dtvmcdonald; 11-17-2019 at 11:44 PM.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:21 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.