Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Vintage TV & Radio Tech Forum

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #9  
Old 10-30-2019, 12:14 AM
Dubis7's Avatar
Dubis7 Dubis7 is offline
Alchemizes cash to tubes
 
Join Date: Nov 2014
Location: Leesburg, VA.
Posts: 397
Okay, hold on.

Can someone double check C1 for me. I think I may have figured out what I did wrong.

When I removed the original C1, I directly wired M1 and a few other pieces that were connected to the negative terminal of C1 to ground, and I also connected the negative terminal of the replacement C1 directly to ground.

However, C1 was mounted through an insulating pad, and in looking at the schematic, that's not actually what's going on with it, is it? Should I rewire it to have it floating away from ground? Maybe that's the origin of this whole thing.
__________________
To keep your tubes running smoothly, make sure to dust underneath the glass as well.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:26 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.