Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 10-20-2019, 03:35 PM
cj_reha's Avatar
cj_reha cj_reha is offline
VideoKarma Member
 
Join Date: Aug 2019
Location: Virginia Beach, VA
Posts: 90
Quote:
Originally Posted by Electronic M View Post
That ain't a locking mech on the knobs. Just a spring to help them grip/keep the plastic from splitting. Don't try to remove the springs, just pull the knobs normally as they were designed to be.

If you plan on collecting more sets you really should get a variac or make a dimbulb tester to soft power your sets.
Thanks for the heads up. I'll try to gently pull off the broken knobs later, hopefully they won't put up too much of a fight. Patience is key...

As for needing a variac/dim bulb tester, I am well aware. I'll get around to it somepoint, this is one of the few exceptions in which I powered on the TV before going through the caps/resistors/etc.
__________________
When you lower your standards, you set a new standard!

ISO: Mitsubishi 6CT-338, Sony Chromatron 19C70/100, Yaou "Colornetron" GTC-9, etc...
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:16 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.