Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 10-03-2019, 12:59 PM
Kevin Kuehn's Avatar
Kevin Kuehn Kevin Kuehn is offline
Workin' Late Again
 
Join Date: Jan 2011
Location: WI
Posts: 3,976
Quote:
Originally Posted by vortalexfan View Post
Its checking infinite on both wire leads, not just one of them, I rechecked my work.
A Hammond #156R should do the trick. As far as intermittent resistance to ground, it's very possible the insulation is breaking down under presence of high voltage, then acting flaky without. If it were my set I'd probably be temporarily tacking in a large wattage 50 ohm resistor to replace the choke and continue to trouble shoot. Ideally you should be bringing up the AC voltage slowly with a variac, or at minimum a dim bulb tester while monitoring the power supply voltage. Highly unlikely your out of the woods, but it's a great start!
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:22 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.