Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 10-03-2019, 11:10 AM
vortalexfan vortalexfan is offline
VideoKarma Member
 
Join Date: Sep 2018
Location: Northern Indiana
Posts: 1,992
Quote:
Originally Posted by Tube TV View Post
Don't worry about replacing the choke until you know it's bad.
Heres how to test it.

There' a black wire that is connected to the filter choke that leads to the lower end of the terminal strip where the electrlyics are connected.
I can't see the other wire that come from the choke, but it too should be at the terminal strip. Mark these so that you can connect them back in the same places.
Unsolder these wires and and see if you can get any resistance between it and the chassis.
The reading with both wires off the choke should be infinity or at least in the several megohm range between the chassis and one of the choke leads
The reading between the 2 leads off the choke should be low. Somewhere around 3 to 20 ohms for example.
OK thanks, I was just getting ready to do that.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:22 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.