Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 10-03-2019, 12:22 AM
Kevin Kuehn's Avatar
Kevin Kuehn Kevin Kuehn is offline
Workin' Late Again
 
Join Date: Jan 2011
Location: WI
Posts: 3,976
All you should need to do is remove the one small white wire from pin 2 of the 5U4 socket. If you follow that white wire over to your terminal strip it should connect to the plus end of one of the electrolytic caps and also to one of the black wires that goes to L1. It's possible you have a wiring error on your terminal strip, but for starters remove the white wire from pin 2 and see if that fixes the excessive current draw problem. Looking at your picture it seems to me that you have that white wire from pin 2 going to the negative side of that cap?


Last edited by Kevin Kuehn; 10-03-2019 at 12:41 AM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:45 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.