![]() |
|
|
|
#1
|
||||
|
||||
|
Simple E-B-C testing of any of the transistors with an Ohm meter would tell you if they are shorted. E to B and C to B should test like a diode, conduct one way, not the other. I'm sure there's a Youtube video somewhere explaining how to do that.
|
|
#2
|
||||
|
||||
|
Better yet would be the diode check function of a multimeter, so you can read the junction voltage. This is really basic stuff, and every transistor on that channel will need to be checked now.
|
|
#3
|
||||
|
||||
|
An inexpensive China tester is another alternative.
![]() Shown testing a common TO-3 packaged 2n3055 npn silicon power transistor. jr |
![]() |
| Thread Tools | |
| Display Modes | |
|
|