Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Diagnostic & Test Equipment

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 09-01-2019, 09:37 PM
old_tv_nut's Avatar
old_tv_nut old_tv_nut is offline
See yourself on Color TV!
 
Join Date: Jul 2004
Location: Rancho Sahuarita
Posts: 7,814
When I look up the 1077, it says it's a sweep comparator.

I may not have it exactly right, but I think the idea is to test an RF amplifier or other device by connecting it to the "Unit Under Test" terminals and then look at the demodulator out signal with a scope locked to the sweep generator (which should be attached to the RF IN). Then (presuming the comparator has an internal circuit that switches back and forth between the Unit Under Test and an internal attenuator), you would get a very accurate measure of the gain or loss of the unit under test. I believe the numbered knobs on the left attenuate the signal to the unit under test and the knobs on the right attenuate the comparison signal. You would adjust the ones on the left to get a reasonable signal level for the unit under test, then adjust the ones on the right to get equal output from the unit under test and the comparison signal, and the difference between the left and right settings then is an accurate measure of gain or loss of the unit under test.
__________________
www.bretl.com
Old TV literature, New York World's Fair, and other miscellany
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:11 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.