Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 08-27-2019, 07:01 PM
freakaftr8's Avatar
freakaftr8 freakaftr8 is offline
Convergence freak!
 
Join Date: Sep 2007
Location: Folsom, CA (no not in the prison)
Posts: 1,778
If this is the one I'm thinking of, there are 3 or 4 white caps with the black ring on one side in the vertical circuit. They go leaky. Have you tried cleaning the tuner. How does it act when you try to switch in the middle of channels? Have access to a VOM that can test capacitance? Could be some out of tolerance caps on the IF too I suppose.

I always do the wiggle test when in question wiggle the tubes around the IF section to see if you get any change while the TV is on usually wear gloves or use a wooden stick to perform this.

Unfortunately I dont have a Sam's on that one.
__________________
Honey, turn on the tv.. I'm cold!
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:58 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.