Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 08-24-2019, 01:58 AM
vortalexfan vortalexfan is offline
VideoKarma Member
 
Join Date: Sep 2018
Location: Northern Indiana
Posts: 1,992
Quote:
Originally Posted by jr_tech View Post
Photofact set 110, folder 9 covers 14 Meck models from 1950...I suspect that the power supply in question is very similar to the one shown in that folder:



The common (connections to the can) of C1 (40,40,40) is floated from chassis ground so that a minus 3 volt supply can be created to provid bias to the video detector stage.

jr
Yes I found the power supply stage after looking over the schematic from Beitman's that I have (unfortunately I do not have access to the Sam's folder for this TV, I have every Sam's Folder from this time period except 110, and I don't wish to pay the $30 that Sam's is asking at their website for this Photofact folder copy.)

It does seem that it does have a floating ground which I'm not sure how it would work to do that with a terminal strip and 3 47 MFD 450 VDC electrolytic caps when the only terminal strips I have have the mounting tabs that mount it to the chassis also doubling as chassis ground terminals, which I don't need in this case.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:10 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.