Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 07-24-2019, 04:31 PM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 15,496
Quote:
Originally Posted by trinescope View Post
I've only dealt with two CRTs so far; a Zenith 25GP22 and the weird wide CRT in a Datapoint 2200. The Zenith was the typical green halo and was the first one I did. I tried a heated copper wire but had little luck with it so I went out and got a heat gun. With the CRT wrapped in a heavy blanket I heated the faceplate as evenly as I could until small "fingers" appeared near the edges. Then I gently pried away the safety glass while still waving the heat gun around the faceplate. The PVA material was pretty easy to remove at that point. The Datapoint CRT was more like the RCA type cataract, but being a pretty small tube the heat gun worked here as well. Guess I was lucky both times since nothing went wrong.

At the time I thought about using a Nichrome wire, but didn't know where to find some.
I've tried heating wire...it always softened the wire to the point it would snap far too easily to work. I quickly learned that all Zenith style cataracts will cut with a UNheated steel wire and some elbow grease...the CRT doesn't even need to be warm. I successfully did a Zenith type cataract removal with cold wire on a 45degree fall evening.
__________________
Tom C.

Zenith: The quality stays in EVEN after the name falls off!
What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4

Last edited by Electronic M; 07-25-2019 at 05:48 PM.
Reply With Quote
  #2  
Old 10-02-2020, 01:07 PM
maxhifi's Avatar
maxhifi maxhifi is offline
VideoKarma Member
 
Join Date: Dec 2010
Posts: 1,871
Quote:
Originally Posted by Electronic M View Post
I've tried heating wire...it always softened the wire to the point it would snap far too easily to work. I quickly learned that all Zenith style cataracts will cut with a UNheated steel wire and some elbow grease...the CRT doesn't even need to be warm. I successfully did a Zenith type cataract removal with cold wire on a 45degree fall evening.
When I did the cataract in my Motorola WID, I found that a wound guitar string worked well - kind of like a saw. Better than just a regular wire. I attached it to two pieces of broom handle, and just went for it. What a mess to clean up after I got the glass off though.. not excited to ever do that job again!
Reply With Quote
  #3  
Old 10-02-2020, 05:03 PM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 15,496
Quote:
Originally Posted by maxhifi View Post
When I did the cataract in my Motorola WID, I found that a wound guitar string worked well - kind of like a saw. Better than just a regular wire. I attached it to two pieces of broom handle, and just went for it. What a mess to clean up after I got the glass off though.. not excited to ever do that job again!
It's only tedious till you end up chiseling off an an RCA safety glass and get skewered all over by glass chips...compared to that hell the work of dealing with the sawing and glue on a Zenith cataract is positively wonderful.
I've done around 10-15 RCA cataracts so far (and a comparable number of Zenith ones) and of the RCA cats I've fixed only 2 did I not end up having to chisel....Both the successful ones had advanced delamination. One fell off when I peeled the tape the other had a 6" diameter attachment point that was cooperative....I might need to do this in hotter weather and use a heat gun but I'm not super comfortable with that...
__________________
Tom C.

Zenith: The quality stays in EVEN after the name falls off!
What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:09 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.