Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Television Broadcast Gear

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #18  
Old 07-12-2019, 08:01 AM
ppppenguin's Avatar
ppppenguin ppppenguin is offline
VideoKarma Member
 
Join Date: Oct 2009
Location: London, UK
Posts: 466
It's standard practice in vision mixers (production switchers in the US) to replace the entire sync and blanking interval. This ensures that the output has consistent sync, burst and blanking. Hence VBI information will not normally pass through a vision mixer.

Same is true in a SDI environment. If a system needs to pass embedded packets these are normally passed through a sidechain. Often decoded and re-encoded.

Most timebase correctors will also replace the entire sync and blanking interval. Back in the 1990s/early noughties I designed a number of TBC/frame synchronisers for G2 Video Systems. We weren't supposed to mention that they would effectively remove macrovision. Our official line when asked about macrovision was "not something we've considered or tested". This was actually true, we hadn't thought about it in the design and I'm not sure we ever ran any formal tests. It's just people found that it did remove macrovision

Hence both vision mixers and TBCs will usually remove macrovision.
__________________
www.borinsky.co.uk Jeffrey Borinsky www.becg.tv
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:07 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.