![]() |
|
|
|
#1
|
||||
|
||||
|
A friend of mine has that turnover record changer! It's a mechanical wonderment to say the least!
Definitely! Spending some time looking at it in detail. It's sort of a quasi paraphase phase inverter? One of the 6V6 grids driven right after the audio amp/tone stack, the other being driven from the inverted signal of the 2nd 6AV6. What makes it a little bit more interesting is that capehart introduces some negative feedback around the 2nd 'phase inverter' 6AV6. I guess that makes the circuit a little more immune to gain variations in 6AV6's in order to keep the push-pull grid drives fairly balanced. A Cathodyne phase inverter would have used the same tube line-up, but been easier, better matched and fewer parts - maybe that one hadn't yet made it's way into hifi! Last edited by dobulee; 05-24-2019 at 10:21 AM. |
|
#2
|
|||
|
|||
|
Quote:
During half a cycle, say the grid of the 1st tube swings positive> cathodes go more positive, making the grounded grid of the 2nd tube negative relative to cathode. Truth be known, the balance wasn't perfectly symmetrical but consumer grade with minimum parts count, and still be "push-pull". The balance was probably on a par with the scheme using the 6AV6 inverter. To tailor the gain, looks like they chose 220K for the plate load resistor and 220K for that series resistor going to the grid. Last edited by old_coot88; 05-24-2019 at 03:02 PM. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|