Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Transistor Portable Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #13  
Old 04-30-2019, 08:22 AM
AlanInSitges's Avatar
AlanInSitges AlanInSitges is offline
VideoKarma Member
 
Join Date: Nov 2017
Location: Sitges, Catalonia, Spain
Posts: 451
I have an 8-inch Sony from the same era that's got the same problem, only quite a bit worse (it's off the bottom of the screen with scan lines about 1/2 inch apart). It's on frequency, and you can sort-of see the vertical roll and lock when you turn the vhold control.

I picked it up at a junk store for cheap, and figured a recap would take care of it. Imagine my surprise to discover that it had already been completely recapped in the power supply and vertical section. Voltages and waveforms are all as they should be, transistors and diodes check good, transformers ohm out correctly, but...the vertical is still messed up.

I guess someone took it to the junk store when they couldn't fix it.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:14 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.