Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #25  
Old 03-31-2019, 02:26 PM
Hugo barbedo Hugo barbedo is offline
VideoKarma Member
 
Join Date: Jul 2018
Posts: 24
ok so i am getting there slowly i think


c15.jpg
my tv has an additional panel on the right of the chassis with 2 additional linearity pots for the vertical that are not present on the american sets and consequently not listed on the schematics that i have
capacitor c15 is absent on my tv and on its place there is a capacitor connecting to that said panel
removing that capacitor and putting a 4n7 capacitor on the position of c15 makes the foldover go away and the pulses for the vertical drive are looking very good now
now i just have a totally squished top on the picture

i am at the point where i am thinking of removing the two linearity pots and recreate the "american"style circuit, that has to work but i consider it cheating.
WP_20190331_20_05_30_Pro.jpg
here each cycle is completed in 20miliseconds and that is equal to 50hz so we are good. the sawtooth looks preety also with a very short fall time (perfectly vertical slope)
WP_20190331_20_05_51_Pro.jpg

Last edited by Hugo barbedo; 03-31-2019 at 03:54 PM.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:03 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.