![]() |
|
#13
|
||||
|
||||
|
Quote:
If you supply a higher freq carrier than designed into your scope you can still glean some info. You won't be able to see individual cycles of the carrier wave or measure it's frequency (unless you have a digital frequency counter built into your scope), but you will be able to see it as a nice fat trace...The thickness of which will be modulated by the AM video carrier. You can check carrier presence, amplitude and modulation. May want to clean the switches that control the output mode/frequency...Old push buttons can get tarnished contacts that won't work in some positions till cleaned. Things to be aware of in tuner patch overs: If one set is hot chassis or has the chassis at some DC potential connecting the sets together could cause damage if you don't connect one and only one set to a line isolation transformer. Also, many sets especially tube era sets instead of having a discrete B- lead on the tuner instead used the shield on the IF coax as the DC return path for the B+...If you unhook the IF lead the tuner may loose power (unless you clip the IF shield to it). Lastly, if the set with the good tuner has its IF disconnected it will have no signal and may react to that by setting the tuner AGC line to a less than ideal value.....If you can navagate those pitfalls then using another sets tuner as an IF source is possible.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 |
| Thread Tools | |
| Display Modes | |
|
|