Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Television Broadcast Gear

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 03-05-2019, 02:32 PM
kf4rca kf4rca is offline
VideoKarma Member
 
Join Date: Feb 2015
Location: Atlanta
Posts: 970
That's true. I worked at an ABC affiliate in the 70's and they were using a converted B/W transmitter (TT25BL). I saw the manual for the retrofit and basically it replaced the ENTIRE modulator panel. It was about 20 inches high and 16 inches wide and had more tubes. Transmitters were high level modulated back then and it took about 200 Watts to modulate to 100% (grid modulation).
The TT25EL was built for color and the station across town had one of those. But it was high level modulation too.
In '77 we installed a Harris BT25L2 which, as I recall, was the first low level modulated transmitter. It used a transversal sideband filter, at an IF frequency, which was a sort of SAW filter.
__________________
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:25 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.