Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 03-02-2019, 01:40 PM
Yamamaya42's Avatar
Yamamaya42 Yamamaya42 is offline
VideoKarma Member
 
Join Date: Nov 2018
Location: Round Rock TX
Posts: 3,255
Quote:
Originally Posted by Electronic M View Post
I've seen ceramics with that exposed bottom before...I believe it is probably done in the factory for a purpose.

If it doesn't leak current under voltage, and if reasonably close to rated capacitance it should be fine.
There lies the headache, it's easy to check the value of a cap with any given digital meter, but leakage is tricky w/o a costly meter or some vintage tester, :/ unless, I go and build the circuit seen here... http://www.angelfire.com/electronic/...ting_caps.html
I do not intend to test electrolytic capacitors with it, so with 400v or more, if the cap under test is good, the reading for leakage should be 0...
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:31 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.