Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Diagnostic & Test Equipment

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #6  
Old 12-06-2018, 07:19 PM
AlanInSitges's Avatar
AlanInSitges AlanInSitges is offline
VideoKarma Member
 
Join Date: Nov 2017
Location: Sitges, Catalonia, Spain
Posts: 451
So far, so good! Running it a 240V I have correct filament voltages, and the pilot is lit in standby mode. I also have ~300V at the output of the secondary, before the standby switch, across the first filter. I didn't turn it on due to that gaping hole up there, and the insulation burned off of the B+ wires. Tomorrow I'll try to get my hands on some silicone and patch it up, replace the burned wires, and bring it up slowly to see if it will work.

Thanks again for all the advice everyone.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:55 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.