Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Diagnostic & Test Equipment

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 11-23-2018, 10:31 AM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 15,496
Some of the Sola constant voltage isolation transformers are good when the line voltage fluctuates.

Isolation trans show up at antique radio and ham swapmeets regularly usually for cheep.

In a pinch, if you have two step down or step up transformers with the same secondary voltage (identical transformers are best) you can connect a secondary from one to a secondary of the other, plug the primary of one into the wall and the device you want isolated into the floating secondary... filament trans are nice for this because you can hook a low voltage lamp to the secondaries and use it as a power indicator...Can even steal heater voltage for experiments off of the low voltage windings. I hear a pair of microwave oven trans will make for a very ballsy isolation transformer (something that can handle ~500W+ watts easily), but the ~3KV AC on the secondaries, when powered, is lethal to touch so building an enclosure is IMO necessary for safety.
I've also used this hack to power up transformer radios with open primary/line voltage windings...All that you have to do is connect a heater trans of the right voltage to the radios heater line and the B+ winding if still good will turn that into B+.

BTW even a good isolation transformer can stop isolating...I had one that appeared to be made in the 30's-50's that I used for a number of years until one day a chassis I was servicing bit me...I took out my DMM and discovered there was significant Primary to secondary voltage. It really surprised me that it could fail like that, and goes to show you gotta test your test equipment for failure sometimes. It is part of the reason I like that hacking two transformers into an isolation trans trick...In that method there are two points of isolation doubling the breakdown voltage, making it twice as hard for primary to secondary leakage, and providing a failsafe isolation if one of the two trans develops a primary to secondary short.
__________________
Tom C.

Zenith: The quality stays in EVEN after the name falls off!
What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4

Last edited by Electronic M; 11-23-2018 at 10:46 AM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:36 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.