Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Vintage TV & Radio Tech Forum

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 11-20-2018, 11:14 AM
old_tv_nut's Avatar
old_tv_nut old_tv_nut is offline
See yourself on Color TV!
 
Join Date: Jul 2004
Location: Rancho Sahuarita
Posts: 7,815
"And how do you get from a sine wave produced by an oscillator to the sawtooth-ish thing needed to drive vertical sweep?"

I stand ready to be corrected, but I believe all sweep oscillators were pulsed. The RCA horizontal synchroguide was a blocking oscillator with a tuned circuit added to produce a sine-wave component for better reaction to sync pulses.

Oscillators in general do not produce pure sine waves naturally since their amplitude increases until something in the circuit limits it, so at the limiting element, the waveform is not a pure sine wave. An exception: HP linear oscillators used a light bulb as a slow-acting feedback element to set the amplitude below the point of non-linearity. http://www.hpl.hp.com/hpjournal/pdfs...Fs/1960-04.pdf
__________________
www.bretl.com
Old TV literature, New York World's Fair, and other miscellany
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:28 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.