![]() |
|
#2
|
||||
|
||||
|
IIRC there was a 'lytic coupling cap in the video that
caused weak & streaky video. Check the CRT voltages on cathodes. Should be apx 130V on most sets. If near 200V you get no raster if everything else OK. You can force a gun on by grounding a cathode through an apx 18K resistor. Use the same value as the collector resistors for the R,G, & B outputs. Last look for open resistor in G-2. Usually carbon & high value. 73 Zeno ![]() LFOD ! |
| Thread Tools | |
| Display Modes | |
|
|