![]() |
|
#32
|
|||
|
|||
|
I then turned my attention to the CRT/Yoke. I removed the CRT from the shell and gave the CRT a quick wipe down.
I replaced the 2 680 ohm resistors (both were within tolerance) and the 120pf 5KV capacitor. I used a 120pf 6KV cap for that. ![]() ![]() ![]() ![]() ![]() I then cleaned up all the wiring and cleaned the connectors too. I then used my lacing cord to tie up each bundle neatly instead of the tape Philco used. ![]() I then cleaned up the inside of the shell. It had a lot of "soot" in there. Now nice and clean. ![]()
|
| Thread Tools | |
| Display Modes | |
|
|