![]() |
|
#2
|
||||
|
||||
|
Usually the power supply isnt regulating & triggering HV shut down ( HVSD )
Could also be over current in HV such as a bad FBT. To diagnose safely you need a variac & AC amp meter. 1) unplug the degausser. 2) hook meter in series with AC line. 3) plug in to variac set at apx 90 V 4) turn on but DONT let the meter go above 1 amp. If it draws over an amp its 95% HV. If it stays on its 95% power supply. Sometime a set wont start at 90 V. turn up a little at a time till it starts. 73 Zeno ![]() LFOD ! |
| Thread Tools | |
| Display Modes | |
|
|