Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Vintage TV & Radio Tech Forum

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 06-22-2018, 12:47 PM
cluelessgame cluelessgame is offline
VideoKarma Member
 
Join Date: Apr 2011
Location: Knoxville, TN
Posts: 66
I have tried adjusting the AGC (labeled "noise gate" on my set) with no success.
Unfortunately the setup I have doesn't allow me to use a different modulator. I have comcast's basic package with the little (POS) "digital adapters" that only have an RF out and outside of plugging it into a demodulator to composite and then back into a modulator there's not much I can do on that end. I do, however, have tons of alignment equipment and even a spectrum analyzer if it comes to it so I'm happy to attempt to modify the TV's IF if a quasi-universal fix could be developed.... I'll certainly post my findings here if I do, but I still need more info on SAW filters before I can proceed
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:15 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.