![]() |
|
|
|
#1
|
|||
|
|||
|
A few months ago I went to the local washer and refrigeration parts house and got a 4 mfd run cap and it got my 17" CCII running perfectly again. This is a part I expect to fail on CCII's.
|
|
#2
|
||||
|
||||
|
Ok,new question. How on Earth do you read one of these caps?
|
|
#3
|
||||
|
||||
|
Pull one from a parts set if you got one. Every CCII, most
flat chassii, every 1st gen S-3 & all pre S-3 13" sets have the same one. Maybe it was TUD but someone got it from an AC shop. It had OEM numbers also the Zenith ## and everyone I noticed were made by GE. |
|
#4
|
||||
|
||||
|
I did, it's not got any uf or voltage values. Just part numbers. Do I just take it into an appliance place and say I need another one?
|
|
#5
|
||||
|
||||
|
That is one option. Another is to put the numbers on it into google and see what Google has to say about its rating. Yet, another is to search forum threads on this topic for the rating of the part.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 |
| Audiokarma |
![]() |
| Thread Tools | |
| Display Modes | |
|
|