![]() |
|
#11
|
||||
|
||||
|
Zener diode is in the 24 V source. 103-105. Also a 2 ohm 2W.
They are mounted behind the chassis either on a little PCB or hand wired old school style depending on year. The 24V transistor is on the chassis facing you. 121-992 IIRC Zener would short & open the 2 ohm killing the set. If the transistor shorts you get 2 white hum bars like a bad filter. The 130 V is more likely. If the oil fillled cap opens there is no regulation & the pix pulsates badly. Could explain the tripler also but a lot did just go bad. 73 Zeno ![]() LFOD ! |
| Thread Tools | |
| Display Modes | |
|
|