Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Introductions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 06-07-2018, 05:59 PM
SeniorSteve's Avatar
SeniorSteve SeniorSteve is offline
returning hobbyist
 
Join Date: Jun 2018
Location: St. Paul, MN
Posts: 8
Hello Electronic M! I have a picture of the front, but I was trying to capture the dial more than the other knobs. It does include the volume/balance knob, hope this is what you are looking for. Picked it up for $50, but it had some issues, no fm mpx along with weak FM reception, and the radio/phono was an add on instead of built in. I don't like having external components on hot chassis, so I just removed the input jack and switch. I'd rather have it "stock". I did recap it and replace the rectifier.

Picked up a Royal 2000 this summer at "Radio Daze", the Northland Antique Radio Club event. I didn't realize what a performer it was, especially being that it was made in 1961 or thereabouts. It was dead, but easy to repair.

It's funny, I seem to be drawn to the Zenith brand. I also have a MM2670 console (1964) that will blow your socks off with it's sound. The germanium transistors for the driver and outputs were good, but I changed them over to silicon so I don't have to worry later on. Had to change the bias on those circuits. It's got a healthy 25+ watts per channel.
Attached Images
File Type: jpg Zenith MJ1035 dial (600 x 338).jpg (74.9 KB, 12 views)
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:45 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.