![]() |
|
|
|
#1
|
|||
|
|||
|
I already have all those marked for replacing but thanks.
Guess I'll see how it appears after that. I suspect it will be the same. Which if it is then so be it, could be far worse for a free set that's 61 years old |
|
#2
|
|||
|
|||
|
So I've replaced the caps and it actually preforms worse? The screen height issue is still an issue and now the screen flickers consistently.
I'm going back to the old caps before I stick more money into this. |
|
#3
|
|||
|
|||
|
Unless I'm reading the can wrong. I'm assuming the prong in the upper right corner to match the cap that is stamped as square on the can. The opposite prong as the triangle and the semi circle is obvi
|
|
#4
|
|||
|
|||
|
Under the red wire is a triangle. Blue is connected to the half moon, as noted, and pin with no obstruction is the square. Outside perimeter tabs are ground.
Ed |
![]() |
| Thread Tools | |
| Display Modes | |
|
|