Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Vintage TV & Radio Tech Forum

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 05-24-2018, 06:54 PM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 15,496
Wire guage varies widely based on set and application. I've seen high tube count TVs where the main heater line is as thick as the stuff in the walls of your house and I've seen signal/B+ hookup wire as thin as the stuff in phono arms...look at what is there and don't go thinner.

IIRC seleniums + end is the same as the band in the diode, and is the end that hooks to the B+ rail.

I usually kill 1+ irons per year so I buy the 6$ new/used non-adjustable specials...Not the ~$100 buck stations.

Best way to discharge is with a HV meter. The slow bleed of the resistor prevents dielectric bounceback...Don't matter how the set is powered.

Some sets have safety bleeder resistors from line to chassis and other dumb stuff...Analyze the schematic case by case and revise as needed.
__________________
Tom C.

Zenith: The quality stays in EVEN after the name falls off!
What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:12 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.